Paam Group supplies 18 mm film faced shuttering plywood to builders, contractors and EPC companies across India. It is the stiffer choice for slab soffits with wider runner spacing, thicker slabs, high walls, fast pours and exposed concrete. Every sheet is bonded with BWP phenolic glue, faced with phenolic film on both sides and marked IS 4990.
At the same span, 18 mm is about 3.4 times as stiff as 12 mm, so it holds a flatter soffit under heavier loads. Not sure which thickness you need? Read 12 mm vs 18 mm shuttering plywood: which to use where.
| Thickness | 18 mm |
|---|---|
| Sheet size | 8 × 4 ft (2440 × 1220 mm); custom sizes on request |
| Sheet weights | 32, 42, 45, 52 and 57 kg |
| Glue | BWP (boiling-water-proof) phenolic |
| Face | Phenolic film on both sides |
| Marking | IS 4990 |
| Edges | Sealed; reseal every cut with a plasticized edge sealant |
A heavier sheet usually has a denser core that resists edge damage and lasts more pours. A wet board also weighs more, so check the IS 4990 marking, thickness and edges when sheets arrive.
Performs efficiently across multiple concrete cycles.
Ensures even and defect-free concrete surfaces.
Designed to withstand harsh site conditions and moisture.
Built for structural strength and dimensional stability.
Maintains form and shape even after repeated use.
Paam Group supplies more than 500 sites and clients a year across India, including Tata Projects, MEIL and Shapoorji Pallonji, from our head office in Osmangunj, Hyderabad. See our full range of film faced shuttering plywood, and pair it with FORMTEK shuttering oil and formwork timber.
Slab Casting
When 12 mm is enough: column boxes, beam sides, walls with close studs and slabs with closely spaced runners. See 12 mm shuttering plywood.
To get more pours from every sheet, seal cut edges, oil before every pour and store sheets flat and covered. Our storage and site-use guide covers each step.
Our 18 mm film faced sheets (8 × 4 ft) come in 32, 42, 45, 52 and 57 kg. A heavier sheet usually has a denser core.
Slab soffits with wider runner spacing, thicker slabs, high walls, fast pours and exposed concrete, where a stiffer board keeps the concrete face flat.
About 3.4 times as stiff at the same span, because stiffness rises with the cube of thickness (18³ ÷ 12³ ≈ 3.4), for boards of the same quality.
The standard sheet is 8 × 4 ft (2440 × 1220 mm). Custom sizes are available on request.
Yes. Our sheets carry the IS 4990 marking. Check the marking, size and batch on the sheets you receive.
Talk to our product expert or request a custom quote today.
Your privacy matters to us. Our website uses a few essential cookies that help improve how our pages perform and provide you with a consistent experience. These cookies do not collect any personal or identifiable information - they simply ensure the site works as intended.