Paam Group supplies 12 mm film faced shuttering plywood to builders, contractors and EPC companies across India. It is the most widely used thickness for column boxes, beam sides, walls, and slabs with closely spaced runners. Every sheet is bonded with BWP phenolic glue, faced with phenolic film on both sides and marked IS 4990.
Choose PAAM ULTRA (about 30 kg) for everyday RCC work, or the denser PAAM HD (about 34 kg) for more repetitions per sheet. Not sure which thickness you need? Read 12 mm vs 18 mm shuttering plywood: which to use where.
| Thickness | 12 mm |
|---|---|
| Sheet size | 8 × 4 ft (2440 × 1220 mm); custom sizes on request |
| Sheet weights | 24, 30, 34 and 38 kg |
| Grades | PAAM ULTRA (about 30 kg) and PAAM HD (about 34 kg) |
| Glue | BWP (boiling-water-proof) phenolic |
| Face | Phenolic film on both sides |
| Marking | IS 4990 |
| Edges | Sealed; reseal every cut with a plasticized edge sealant |
A heavier sheet usually has a denser core that resists edge damage and lasts more pours. A wet board also weighs more, so check the IS 4990 marking, thickness and edges when sheets arrive.
Performs efficiently across multiple concrete cycles.
Ensures even and defect-free concrete surfaces.
Designed to withstand harsh site conditions and moisture.
Built for structural strength and dimensional stability.
Maintains form and shape even after repeated use.
Paam Group supplies more than 500 sites and clients a year across India, including Tata Projects, MEIL and Shapoorji Pallonji, from our head office in Osmangunj, Hyderabad. See our full range of film faced shuttering plywood, and pair it with FORMTEK shuttering oil and formwork timber.
Slab Casting
When to step up to 18 mm: wider runner spacing, thicker slabs, high walls, fast pours or exposed concrete. 18 mm is about 3.4 times as stiff as 12 mm at the same span. See 18 mm shuttering plywood.
To get more pours from every sheet, seal cut edges, oil before every pour and store sheets flat and covered. Our storage and site-use guide covers each step.
Our 12 mm film faced sheets (8 × 4 ft) come in 24, 30, 34 and 38 kg. PAAM ULTRA is about 30 kg and PAAM HD about 34 kg.
Column boxes, beam sides, walls and slab soffits where the supports are closely spaced. It is lighter to handle and cut than 18 mm.
Yes, when the runners under it are closely spaced. For wider runner spacing, thicker slabs or exposed finishes, 18 mm is stiffer and usually the better choice. Your formwork design should set the thickness and spacing together.
PAAM HD is heavier and denser (about 34 kg in 12 mm against about 30 kg for PAAM ULTRA), so it resists edge damage better and is made for more repetitions. PAAM ULTRA suits everyday RCC work.
The standard sheet is 8 × 4 ft (2440 × 1220 mm). Custom sizes are available on request.
Yes. Our sheets carry the IS 4990 marking. Check the marking, size and batch on the sheets you receive.
Talk to our product expert or request a custom quote today.
Your privacy matters to us. Our website uses a few essential cookies that help improve how our pages perform and provide you with a consistent experience. These cookies do not collect any personal or identifiable information - they simply ensure the site works as intended.