Shuttering Plywood & Timber Products > 12 mm Shuttering Plywood

12 mm Film Faced Shuttering Plywood

Paam Group supplies 12 mm film faced shuttering plywood to builders, contractors and EPC companies across India. It is the most widely used thickness for column boxes, beam sides, walls, and slabs with closely spaced runners. Every sheet is bonded with BWP phenolic glue, faced with phenolic film on both sides and marked IS 4990.

Choose PAAM ULTRA (about 30 kg) for everyday RCC work, or the denser PAAM HD (about 34 kg) for more repetitions per sheet. Not sure which thickness you need? Read 12 mm vs 18 mm shuttering plywood: which to use where.

12 mm Shuttering Plywood Specifications

Thickness12 mm
Sheet size8 × 4 ft (2440 × 1220 mm); custom sizes on request
Sheet weights24, 30, 34 and 38 kg
GradesPAAM ULTRA (about 30 kg) and PAAM HD (about 34 kg)
GlueBWP (boiling-water-proof) phenolic
FacePhenolic film on both sides
MarkingIS 4990
EdgesSealed; reseal every cut with a plasticized edge sealant

A heavier sheet usually has a denser core that resists edge damage and lasts more pours. A wet board also weighs more, so check the IS 4990 marking, thickness and edges when sheets arrive.

Key Features

High reusability

High Reusability

Performs efficiently across multiple concrete cycles.

Smooth surface finish

Smooth Surface Finish

Ensures even and defect-free concrete surfaces.

Weather and water resistant

Weather & Water Resistant

Designed to withstand harsh site conditions and moisture.

High load-bearing capacity

High Load-Bearing Capacity

Built for structural strength and dimensional stability.

Minimal swelling or warping

Minimal Swelling or Warping

Maintains form and shape even after repeated use.

Why Choose Paam Plywood?

Made from premium hardwood veneers

Long-lasting and cost-effective

Consistent thickness and bonding

Custom sizes available on request

Trusted by builders and contractors across India

Supplying Sites Across India

Paam Group supplies more than 500 sites and clients a year across India, including Tata Projects, MEIL and Shapoorji Pallonji, from our head office in Osmangunj, Hyderabad. See our full range of film faced shuttering plywood, and pair it with FORMTEK shuttering oil and formwork timber.

Application Areas

Shuttering plywood for slab casting

Slab Casting

Column and beam formwork with shuttering plywood

Column and Beam Formwork

Shuttering plywood in commercial building construction

Commercial Building Construction

Shuttering plywood for infrastructure projects

Infrastructure Projects

Precast concrete moulds made with shuttering plywood

Precast Concrete Molds

Where 12 mm Shuttering Plywood Works Best

  • Column boxes and beam sides: short spans between yokes and battens.
  • Walls with closely spaced studs or walers.
  • Slab soffits where the runners underneath are closely spaced.
  • Staircases, chajjas and small pours, where a lighter sheet is easier to cut and handle.

When to step up to 18 mm: wider runner spacing, thicker slabs, high walls, fast pours or exposed concrete. 18 mm is about 3.4 times as stiff as 12 mm at the same span. See 18 mm shuttering plywood.

To get more pours from every sheet, seal cut edges, oil before every pour and store sheets flat and covered. Our storage and site-use guide covers each step.

12 mm Shuttering Plywood FAQs

Our 12 mm film faced sheets (8 × 4 ft) come in 24, 30, 34 and 38 kg. PAAM ULTRA is about 30 kg and PAAM HD about 34 kg.

Column boxes, beam sides, walls and slab soffits where the supports are closely spaced. It is lighter to handle and cut than 18 mm.

Yes, when the runners under it are closely spaced. For wider runner spacing, thicker slabs or exposed finishes, 18 mm is stiffer and usually the better choice. Your formwork design should set the thickness and spacing together.

PAAM HD is heavier and denser (about 34 kg in 12 mm against about 30 kg for PAAM ULTRA), so it resists edge damage better and is made for more repetitions. PAAM ULTRA suits everyday RCC work.

The standard sheet is 8 × 4 ft (2440 × 1220 mm). Custom sizes are available on request.

Yes. Our sheets carry the IS 4990 marking. Check the marking, size and batch on the sheets you receive.

Looking for durable, high-performance shuttering plywood?

Talk to our product expert or request a custom quote today.